Home > News >

PRODUCT

Jaw Crusher Selection: Key Factors and On-Site Operating Control | ZK Corp

Date:2026-11-20 10:25:45 Author:admin Views: 180

Key Points for Jaw Crusher Selection and On-Site Operating Control

The jaw crusher is one of the most widely used types of primary crushing equipment in the mineral processing industry. Introduced in 1858, it has remained in widespread use for more than a century because of its simple structure, reliable operation, ease of maintenance, and economical operating costs. In metal ore processing plants, the jaw crusher often serves as the first stage of the crushing circuit: large pieces of run-of-mine ore delivered from the mine pass through it before moving to downstream processing. Correct equipment selection and proper operation directly affect the stability of the entire production line.

1. Jaw Crusher Working Principle and Classification

The jaw crusher uses a reciprocating compression action to crush material. The motor drives the belt and pulley, which rotate the eccentric shaft and cause the movable jaw to move. As the movable jaw moves toward the fixed jaw, the toggle mechanism transmits the motion and the material is compressed or fractured between the jaw plates. As the movable jaw moves away from the fixed jaw, the crushed material moves downward and is discharged through the bottom of the crushing chamber. Continuous motor rotation repeats this crushing-and-discharge cycle.

Jaw crushers are commonly classified according to the motion of the movable jaw. The two types most widely used in industry are the simple pendulum jaw crusher and the compound pendulum jaw crusher.

Simple Pendulum Jaw Crusher

In a simple pendulum jaw crusher, the movable jaw follows a relatively simple swinging motion. The source describes its typical crushing ratio as 3–6. Its advantages include a relatively simple structure, lower jaw plate wear, and less over-crushing of the product. Its limitations include lower operating efficiency and a higher proportion of needle-shaped and flaky particles in the product. Simple pendulum designs are mainly used in medium- and large-sized machines and are suitable for crushing hard materials.

Compound Pendulum Jaw Crusher

A compound pendulum jaw crusher is relatively lightweight, has fewer components, and features a more compact structure. Its crushing chamber can achieve good material filling, helping to crush material more evenly. According to the source, its productivity can be 20%–30% higher than that of a simple pendulum crusher of the same specification, and its crushing ratio can reach 10. Although early compound pendulum models were generally small or medium-sized because of the loads on the eccentric shaft and bearings, this design has also developed toward larger machine sizes.

The source gives a general application range of ores and rocks with compressive strength not exceeding 320 MPa and feed sizes of approximately 125–1,000 mm. Actual suitability depends on material characteristics, feed size, required product size, capacity, and the selected crusher model.

2. Key Points for On-Site Operating Control

2.1 Maintain Uniform Feeding

Uniform feeding is a basic requirement for stable jaw crusher operation and consistent production. Large fluctuations in feed rate can cause motor current to vary and may lead to material blockage or an unplanned shutdown.

Operating measures: Use a vibrating feeder to provide controlled, consistent feed and avoid concentrated material accumulation that can create uneven loading on the movable jaw. Distribute material across the width of the crushing chamber. The source gives 70%–85% of rated current as a normal operating reference range; operators should follow the equipment manufacturer's instructions and the actual operating limits of the installed machine. Feed rate can be adjusted by monitoring main motor current together with the crusher's operating condition.

During startup, the source notes that the initial peak current generally takes approximately 30–40 seconds to fall to the normal operating level. During steady operation, monitor the ammeter and do not allow the motor to remain above its rated current for an extended period.

2.2 Inspect the Discharge Opening Regularly

As the jaw plates wear, the discharge opening gradually becomes larger, which can result in a coarser product. Do not assess crusher condition by motor current alone. Also monitor downstream equipment: an increase in screen oversize return or a rise in mill current may indicate that the crusher discharge opening needs to be checked and adjusted.

The lower section of the fixed jaw plate is described as the area subject to the fastest wear. To extend service life, some jaw plates are designed to be symmetrical and reversible, allowing them to be turned around when the lower section becomes worn, provided this is permitted by the plate design and the manufacturer's maintenance instructions.

2.3 Do Not Overlook Tramp Iron Removal

Scrap steel, drill rods, excavator bucket teeth, and other metal objects can cause serious problems if they enter the crusher. Iron pieces or other uncrushable objects trapped in the crushing chamber can jam or stall the machine. The rear toggle plate transmits crushing force and may also act as a mechanical safety component: if an uncrushable object enters the chamber, the toggle plate may break to help protect major crusher components. However, repeated toggle plate failures can cause costly production interruptions.

On-site practice: A vibrating screen combined with a magnetic separator can be used as a pre-treatment arrangement to remove metal contaminants, tree roots, and other foreign objects before crushing. The magnetic separator must be cleaned regularly so accumulated captured iron does not reduce its effectiveness. The source includes an operator's account that, after a permanent-magnet separator was installed, iron pieces were captured before reaching the crusher and no further jamming occurred for six months. This is an individual site report, not a guaranteed performance result.

Previous:Sulfate-Resistant Cement Grinding Test for an Oilfield Project in the Middle East

Next Page:none

ONLINE MESSAGE

Hello 24 hours a day at your service
you are welcome to inquire

  • Name *

  • Whatsapp*

  • Capacity

  • E-mail *

  • Raw material

  • Company name

  • Message *