Causes Of The Damage Of The Pulse Dust Collector Bags
Date:2020-04-30 16:00:38
Author:admin
Views:
138
With the continuous development of society in recent years, the problem of increased air pollution by industry is imminent, the country pays more and more attention to air quality, and industrial dust removal has become an urgent task. ZK Corp Bag Type Dust Collector proves its important position in air pollution control relying on its strength.
The pulse bag dust collector adopts the pulse bag dust removal technology, which overcomes the shortcomings of the conventional pulse dust collector and the sub-chamber back-blowing dust collector. Overcoming the shortcomings of conventional pulse dust collectors and sub-chamber reverse blowing dust collectors, using compressed gas as the cleaning power, using the pulse blowing mechanism to release compressed air in an instant, high-speed injection into the filter bag, the filter bag swells rapidly, relying on impact vibration and reverse air flow to remove dust accumulation on the surface of the filter bag; Strong dust removal ability, high dust removal efficiency, low emission concentration, small air leakage rate, small energy consumption, small footprint, stable and reliable operation, and economic benefits.
So what are the causes of the damage of the pulse dust collector bags?
1. Filter wind speed
In the process of using the bag filter, the filtering air speed cannot be too high. If in the production process, in order to reduce costs, increase profits, and increase the filtration air speed, there will be no reaction in a short time, but the service life of the filter bag is greatly shortened. This not only does not reduce the cost, but also increases the economic burden for replacing the cloth bag.
2. The effect of dust
When using a bag filter, you should consider the nature of the dust to see if there are acids, alkalis or other corrosive substances. Select the appropriate filter material according to the nature of the dust, so that the filter bag can collect the dust normally without affecting its service life.
3. The influence of temperature during use
Choose a bag suitable for the corresponding dust temperature. If the temperature of the dust is too high, the selected bag will exceed the normal use temperature, which will shorten its service life and seriously burn the bag. Therefore, when choosing the cloth bag, the temperature of the dust should be calculated, and the appropriate dust bag should be selected.
4. The quality of bags
The processing of cloth bags is important. Some merchants use cloth bags produced by small workshops. Due to the poor quality of the raw materials, the bags will be open, cracked and bottomed. The size of the cloth bag is too small, and the phenomenon of dropping the bag will occur after the larger dust is absorbed.
5. The nozzle position of the blowback system
The position of the reverse nozzle is not correct, which will cause the reverse blowing deflection. Therefore, you must choose a strong manufacturer for the bag dust collector. Its quality is guaranteed, and the cost of replacing the bag will be reduced in the later stage, which will not affect the project.
Zhengzhou Mining Machinery Co.,Ltd. a professional mechanical equipment manufacturer, if you want to know more about the industrial pulse bag filter, please feel free to call us!
