Operations after accident treatment of ball mill

There are few reasons why the ball mill has failed to stop the production line, the main reason is that usually did not pay attention to equipment maintenance work caused. Ball mill accident shutdown mainly refers to the lubrication system, power supply system or equipment itself has a fault, but can not be excluded in the operating conditions, must immediately stop the operation of the parking. After the accident is handled, in order to start the equipment smoothly, should do the following operations after accident treatment of ball mill. 1. Check the box in the bottom of the mine feeder whether there have ore, if the deposit is more, should open the bottom discharge port, to discharge ore, otherwise there is a lot of ore inside the box, to the mine resistance is too large, will cause difficult to start; 2. Before starting should be turning, so that the tube of ore and media fully mobilized to reduce eccentric; 3. Before starting to conduct a comprehensive inspection of machinery and appliances. If necessary, use the meter to measur the insulation of the motor; 4. If the mechanical, electrical, electrical appliances do not start up properly, explained the heavy load, had to open the manhole cover to dispare part of the ore or ball, when start the normal operation, to put ore or ball into the mill. In addition to the ball mill manufacturing accuracy, the quality of the installation is the key to the normal operation of the ball mill, often due to the poor quality of the installation and rework, resulting in economic losses. Henan Zhengzhou Mining Machinery Co.,Lt. is a professional manufacturer of ball mill in China, we also offer installation, operation training and after-sales service to make sure the normal running and high performance of your machinery. Welcome your inquiry!