- Home > Products > Crushing Equipment >
Capacity: 15 - 550 (t/h)
Inlet size: 400x730 - 830x2050 (mm)
Max feed size: 950 (mm)
Application: Ore, Stone, Limestone, Quartz, etc.
PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material.
| Model | Specification |
Inlet size (mm) |
Max feeding size (mm) |
Capacity (t/h) |
Power (kW) |
Boundary size (mm) |
Weight (t) |
| PF-0807 | φ850×700 | 400×730 | 300 | 15～30 | 30～45 | 2210×1490×2670 | 8.1 |
| PF-1007 | φ1000×700 | 400×730 | 300 | 30～50 | 37～55 | 2400×1558×2670 | 9.5 |
| PF-1010 | φ1000×1050 | 400×1080 | 350 | 50～80 | 55～75 | 2400×2250×2820 | 12.2 |
| PF-1210 | φ1250×1050 | 400×1080 | 350 | 70～120 | 110～132 | 2690×2338×2890 | 14.9 |
| PF-1214 | φ1250×1400 | 400×1430 | 350 | 130～180 | 132～160 | 2690×2688×2890 | 18.6 |
| PF-1310 | φ1300×1050 | 490×1170 | 400 | 80～140 | 110～160 | 2780×2478×2855 | 16.2 |
| PF-1315 | φ1320×1500 | 860×1520 | 500 | 160～250 | 180～260 | 3096×3273×3067 | 19.3 |
| PF-1415 | φ1450×1500 | 1145×1520 | 950 | 220～450 | 220～315 | 3745×3022×3519 | 27 |
| PF-1520 | φ1520×2000 | 830×2050 | 700 | 300～550 | 315～440 | 3581×3560×3865 | 36.5 |
1. Multiple chamber can make it evenly and suitable for crushing hard rock.;
2. Large low feed port makes it easy to layout production line and increase the feed size;
3. New wear-resistant material of the plate hammer, impact plate and liner can last longer life;
4. High chrome hammer and unique counterattack lining board are particularly suitable for crushing hard rock and energy efficient;
5. The entire plate hammer structure makes the materials particle size more smaller and cube-shaped;
6. It uses fully hydraulic system, so it is easy and more convenient for maintenance and replacement of worn parts.
