Ore Vertical Mill

Grinding Plate Dia: 1400 - 2700 (mm)

 

Output: 70 - 660 (t/h)

 

Applied material: Copper, Gold, Iron, Chrome ore

 

Application: Ore Dressing Plant

Leave a Message Chat Online
Introduction
Specification
Advantage

Ore vertical mill is also choice for nonflammable and non-explosive minerals of which Mohs hardness is less than 9.3, moisture content is less than 6%, for example: quartz, feldspar, calcite, talcum, barite, fluorite, rare earth, marble, ceramic, aluminous bauxite, manganese ore, iron ore, copper ore, phosphorus rock, red ferric oxide, zircon, slag, granulating slag, cement clinker, active carbon, dolomite, granite, garnet, yellow ferric oxide, fertilizer, multiplex fertilizer, fly ash, soft coal, coking coal, lignite, magnesite, chromium oxide green, gold ore, red clay, clay, kaolin, coal tar creosote, coal slack, porcelain clay, cyanite, fluorspar, bentonite clay, medical stone, rhyolite, greenstone pyrophillite, shale, basalt, gypsum, graphite, etc.

The fineness from the finished product could be adjusted from 100 mesh to 325 mesh according to specific requirements of clients.

Model Grinding Table Diameter
(mm)		 Roller Diameter
(mm)		 Roller Number
(n)		 Motor
(kW)		 Output
(t/h)
GRMR22.30 2200 1400 3 550 70
GRMR26.30 2600 1600 3 790 100
GRMR28.30 2800 1750 3 900 115
GRMR30.30 3000 1700 3 1000 120
GRMR32.30 3200 1500 3 1400 160
GRMR34.30 3400 1500 3 1600 180
GRMR36.41 3600 1600 4 1800 200
GRMR38.41 3800 1700 4 1900 230
GRMR40.41 4000 1800 4 2240 260
GRMR43.41 4300 1900 4 2500 310
GRMR46.41 4600 2060 4 3150 350
GRMR48.41 4800 2240 4 3350 390
GRMR50.41 5000 2360 4 3500 420
GRMR53.41 5300 2500 4 3800 470
GRMR56.41 5600 2600 4 4500 540
GRMR59.61 5900 2600 6 5000 610
GRMR63.61 6300 2700 6 6000 720


Note: mill spectral pattern benchmark

  1. Material medium friction (MF)=0.9~1.0;
  2. Material moisture max 7%;
  3. Refined powder granularity 80μmR 12~15%;
  4. Refined powder moisture 0.5~1.0%;
  5. The concrete mill installed power and technology parameter will be adjusted appropritely basing on the actual material property and requirements of owner;
  6. The above specification also applies to limestone powder mill, and the concrete type selection shall be decided according to material property.

1. Composite separator improves the efficiency of the powder. 

2. With the function of automatic lifting and falling , can realize no-load starting. 

3. Welded type arc plate is used for sealing, it features simple structure, reliable performance, well-sealed structure. 

4. By means of the roller swing-out device, the grinding rollers can be turned out of the mill, which is in favor of maintenance. 

5. The limit mechanism avoids the fiction and crash of metals between grinding roller and grinding plate, increasing the rotating stability and security. 

6. Operating pressure of hydraulic system is low, can reduce the leakage failure and the mill vibration , is good for operation and management. 

7. The centralized circulating oil lubrication is applied to the grinding roller bearings, which ensures the bearing operate at constant temperature and with pure oil, so that longer service life is achieved.
 

RELATED PRODUCTS

Ore Grinding Mill

Ore Ball Mill

 Ore Grinding Mill

Ore Vertical Mill

Send Inquiry